User`s guide

Chapter 4 _________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 101
OK
>send
Oil ppm= 16.6 ppm
>
Command 'FORM /' will return the default output format. The default
output format depends on the device configuration.
>form /
OK
>send
aw= 0.087 T= 24.0 'C
>
UNIT
Use the UNIT command to select metric or non-metric output units:
UNIT [x]<cr>
where
x
=
M or N
where
M
=
Metric units
N
=
Non-metric units
NOTE
This comm
and changes both the serial output and display units to either
metric or non
-metric units. When you want to output both metric and
non
-metric units simultaneously on the serial line and display, select the
display units later by using the display/keypad.