User`s guide

Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 29
Mounting with DIN Rail Installation Kit
DIN rail installation kit includes a wall mounting kit, 2 clip-fasteners,
and 2 screws M4 x 10 DIN 7985 (Vaisala order code: 215094).
1. Attach two spring holders to the plastic mounting plate by using the
screws provided in the installation kit.
2. Fasten MMT330 to the plastic mounting plate with 4 screws
(provided).
3. Press the transmitter onto the DIN rail so that the clip-fasteners
snap into the rail.
0503-002
Figure 8 Mounting with DIN Rail Installation Kit
Pole Installation with Installation Kit for
Pole or Pipeline
Installation kit for pole or pipeline (Vaisala order code: 215108) includes
the metal mounting plate and 4 mounting nuts for pole mounting. When
mounting, the arrow in the metal mounting plate must point upward, see
Figure 11 on page 30.
0503-006
Figure 9 Vertical Pole
The following numbers refer to Figure 9 above:
1
=
Fixing brackets (2 pcs) M8 (provided) for 30 ... 102 mm poles
2
=
Mounting nuts M8 (4 pcs)