User`s guide

Chapter 3 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 39
CHAPTER 3
OPERATION
This chapter contains information that is needed to operate TACMET
MAWS with the handheld terminal and MIDAS IV software.
Communication Connections
There are four options for communication connections:
1. Hardwire connection between TACMET MAWS and the
handheld terminal.
- Connect the handheld terminal cable to the Hand Terminal
connector (marked with a yellow arrow) on the upper base of
TACMET MAWS. See section Handheld Terminal on page
40 for information on using the handheld terminal.
2. Hardwire connection between TACMET MAWS and the
MIDAS IV PC.
- Connect the landline cable to the PC Connector connector
(marked with a yellow arrow) on the lower base of TACMET
MAWS and to the MIDAS IV PC. See section MIDAS IV
Software on page 56 for information on using the MIDAS IV
software.
3. Modem connection between TACMET MAWS and the MIDAS
IV PC.
- See Installation Manual
4. RF connection between TACMET MAWS and the MIDAS IV
PC.
- See Installation Manual