User`s guide

Chapter 3 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 53
Setup
Press ↓ on the Status screen to get to the Setup screen.
Setup .
Name : MAWS1
Time : hh mm ss YY MM DD
13 10 00 03 10 29
Timez : 2.0
Alt : 21.7 m
Pslev : 1.1 m
WindC : 0.0
Rf-HT : 1
Rf-PC : 1
Sys.T : 1
Enh. : 1
Units : 0
↓a ↑=Prev
NOTE
When taking TACMET MAWS into use for the first time or upon
connecting the battery, the station dependent settings must be
checked. All the settings (excluding Name) are mandatory.
NOTE
When changing the station dependent settings, connect the handheld
terminal to TACMET MAWS with a hard wire.
To change the station dependent settings do as follows:
1. Press Enter to move to the desired field.
2. When the cursor is on the desired field, press Space to get the
input field.
3. Wait until the square brackets appear and type a value (use shift
modes as explained in section Shift Key on page 41).
4. After typing a value, press Enter to accept the new value. If you
do not type a new value and you press Enter the value remains
unchanged.
5. Reset the station (see section Status on page 52) after you have
changed station dependent settings.