User`s guide

Chapter 1 ________________________________________________________ General Information
VAISALA _______________________________________________________________________ 13
Recycling
Recycle all applicable material.
Dispose of batteries and the unit according to statutory regulations. Do
not dispose of with regular household refuse.
Regulatory Compliances
Vaisala WINDCAP
®
Ultrasonic Wind Sensor WMT701, WMT702, and
WMT703 comply with the following performance and environmental test
standards:
Wind tunnel tests have been performed according to Sonic
anemometers/thermometers -Acceptance test methods for mean wind
measurements ISO16622:2002.
Table 3 Environmental Tests
Test Setup According to
Wind driven rain MIL-STD 810G Method 506.5 and
Telcordia GR-487-Core
Salt fog VDA 621 - 415 / IEC 60068-2-52
Leak test (Ingression Protection) IEC 60529 class IP67
Vibration IEC 60068-2-6/IEC 60945/Lloyd's test
Shock MIL-STD-202G, Method 213B, cond. J
Dry heat IEC 60068-2-2/IEC 60068-2-48
Damp heat cyclic IEC 60068-2-30, Test Db
Damp heat IEC 60068-2-78
Low temperature IEC 60068-2-1 Test Ab/Ad
Free fall (rough handling) IEC 60068-2-31
Change of temperature IEC 60068-2-14
EMC tests are based on a European product family standard: EN 61326-
1:2006 (Electrical equipment for measurement, control and laboratory
use - EMC requirements for use in industrial locations) and EN
60945:2002 (Maritime Navigation and Radiocommunication Equipment
and Systems - General Requirements - Methods of Testing and Required
Test Results).