Operating instructions

16
Appliance Preparation
1. Rough-in the gas line and electrical wiring for a fan (if any).
2. Decide where the stove should be positioned to avoid moving it once all the casting pieces
are attached together.
3. Place the casting base upside down. Unscrew the bolts to insert the legs.
4. Slide each leg under the head of its bolt.
5. Tighten the bolts securely with a wrench.


%ROWV
Appliance’s foot print
Casting Base
1. Release the spring bolts at top and bottom
of the window by pushing and turning 1/4
turn.
2. Lift the window and set it aside in a safe
place to avoid damage.
3. Remove the log pack from inside the fi rebox
and set it aside with the window. Please
handle the logs carefully as they are made of
fragile material and can easily be damaged.
Window &
Log Pack
x 4
Detail
6. Fix the casting base to the fl oor or
hearth using bolts (not supplied)
through the casting feet—see the
bolting pattern below. (Required for
mobile homes only).