Operating instructions

32
Options
Appliance
Cast Stoves
Venting
Fan (Blower)
MF28ILN—Natural Gas Installations
MF28ILP—Propane Gas Installations
Conversion
Kits
MFCS01—Madrona Stove Kit Standard Black
MFCS02—Madrona Stove Kit Majolica Brown
551DVK—Direct Vent Kit, for horizontal terminations with vertical rise.
See also venting accessories listed on pages 35–36.
555CFK—Circulating Fan Kit with 6’ c/w grounded cordset.
MA28INK—Conversion Kit to Natural Gas
MA28IPK—Conversion Kit to Propane Gas
Safety Screen
MFDKSG—Madrona Stove Door Kit Safety Guard
Other
Accessories
1265WSK—Wall Switch Control Kit
Hearth Gate (optional)
Hearth gates such as Kidco’s are available at retail stores carrying safety products for children.
If there is no transmission from the handset to the receiver within a 6-hour period, the appliance
will go to Standby
(pilot) mode.
The remote control handset and receiver are programmed to function together. In case of a
replacement of the handset or the receiver, you will need to reset the receiver to allow them to
function together. Contact your dealer for details
Remote handset: BATT will appear on
the display when the battery needs to be
replaced.
Replace with one 9 V alkaline battery.
Receiver: Three short ‘beeps’ will sound
when the motor turns when the batteries need to be replaced. Replace with four 1.5 V alkaline
batteries.
NOTE: With very low battery, the valve shuts off the fi re completely. This does not happen when
the power supply is interrupted.
CAUTION
DO NOT USE a screwdriver or other metallic object
to remove the batteries from the battery box or the
handset! This could cause a short circuit.
Remote Control Operation
Low Battery
Indication
Automatic
Standby Mode
Handset /
Receiver
Match
Poor
Reception
If the reception is poor, remove the tape from the antenna on the receiver and stretch the antenna
toward an open area. This should improve reception.