Unit installation

11. CONNECTING THE GAS SUPPLY

 Extend the gas supply pipe to a convenient point beneath the appliance and

connect it to the inlet pipe at the right side of the fire using the Rp1/4 (1.4in. B.S.P)

elbow provided.

The supply pipe must be of rigid material (e.g. copper). Flexible connections must not

be used.

 Provision for isolation of the gas supply upstream of the fire must be provided for

safety and servicing.

 Pressure test the installation for gas soundness in accordance with the current

edition of B.S.6891.

Page 22

INSTALLER GUIDE