Unit installation

12. FITTING THE CERAMIC COAL EFFECT
1. Place the fuel bed (embossed 'A' underneath) in position. The front edge of the fuel
bed locates under the flange of the locating strip at the base of the firebox (See figure
15).
2. Place the front right coal (embossed 'B'
underneath) in position. The flat bottom front face
of the coal should rest on the metal ledge
immediately behind the bottom front of the firebox
opening. Slide the coal to the right side (See
figure 16).
Page 23
© Baxi Heating U.K. Limited 2010.
Figure 15. Fuel bed ‘A’ location.
Figure 16. Front right coal ‘B’
location.
INSTALLER GUIDE