Operator`s manual

--- 8 4 ---

H. Periodic maintenance

H 5.11. Check and adjust valve clea-

rance (36)

A3565--- 120

Both inlet and exhaust valves should have a valve

clearance of 0.35 mm (0.014 in). The valve clearance can

be adjusted when the engine is either warm or cold.

Checking and adjustment should be carried out by an

authorized workshop.

H 5.12. Change cab air filter and up-

per filter

(extra equipment) (37)

Change lower filter

AH40

Lift up the filter housing cover (1) and replace the filter (2)

with a new one (fit the cover correctly, the guides (3)face

to face). Change filter more often if necessary.

Change upper filter (extra equipment)

AH47

--- Remove the air cleaner housing cover (1).

--- Pull the mounting links (3) of the filter element (2)up

and turn to the arrow direction

--- Remove the filter element and replace the filter with a

new one

--- Fit the filter element, the arrow pointing upwards

H 5.13. Tighten frame nuts and

bolts (38)

H 5.14. Grease flywheel ring ge-

ar (39)

AH33

Remove first the shield. On the left---hand side of the

clutch housing there is a hole (remove the shield plug)

through which the ring gear can be greased. Apply a little

grease (one stroke with a grease gun) at a few points on

the ring gear. With use the grease will spread round the

gear. Use Valtra Moly Grease, about 1 cm