Operator`s manual

--- 6 6 ---
G. Maintenance schedule
G3.Grease
Always use the following greases in Valtra tractors. Each
point requires it own type of grease.
Valtra Grease, NLGI2
Universal grease
Lithium---based universal grease. Is suitable for grea-
sing all heavy machines.
--- 2 5 ˚ ... +130˚C
Universal grease of high quality, lithium based grease for
vehicle use. It is recommended for greasing wheel
bearings, chassis water pumps, catepillar rollers etc. The
grease is adhesive, protects against corrosion and resists
water and varying temperatures.
Temperature range is ---25˚ ... +130˚C.
Valtra Calsium LF, NLGI2
Calsium Grease LF
Is suitable for greasing all heavy machines. Long fibre
grease. Colour red. Especially good for greasing points
exposed to water.
--- 2 5 ˚ ... +80˚C
Calsium LF is of long fibre, high quality and calsium based
universal grease for vehicle use. It is recommended for
greasing chassis, water pumps, pins etc.The grease is
adhesive, protects against corrosion and resists water and
varying temperatures.
Temperature range is ---25˚ ... +80˚C.
Valtra Grease Moly
Moly Grease
Is suitable for greasing all heavy machines. Lithium---ba-
sed universal grease. M olybdenum sulphide as an addi-
tive (1---3%) improves greasing in places exposed to
shock loads.
--- 2 5 ˚ ... +130˚C
Universal grease of high quality, lithium based grease for
vehicle use. It is recommended for greasing wheel
bearings, chassis water pumps, catepillar rollers etc. The
grease is adhesive, protects against corrosion and resists
water and varying temperatures.
Temperature range is ---25˚ ... +130˚C.
Avoid repeating skin contact.
Protect nature and take care of empty packages.
G4. Maintenance schedule
PERIODICAL MAINTENANCE---schedule (according to
operator’s manual) is recommended for all tractors and
specially for tractors, which have more than 1000 running
hours in one year. The periodical maintenances from 50
hours onwards can also be ordered from the authorized
workshop. In that case the periodical maintenance is
carried out by Valtra authorized and trained service
personnel.
YEARLY MAINTENANCE---schedule should be carried
out by an authorized workshop, but for tractors which
have under 1000 running hours in one year the operator
has to carry out the normal service routines according to
the following table (like daily and weekly periodic
maintenance).
Observe when doing the services that if the tractor is
equipped with extra equipment like towing device, air
condition, air pressure brakes etc. the periodical
maintenances and checks for them must be carried out.
The extra equipment which needs servicing is given in the
end of this manual in section ”K”.