Z-Bracket Double Track Bypass Barn Door Hardware Installation Manual
SAFETY PRECAUTIONS WARNING! Power tools can cause serious damage if not professionally used. Safety gear must be worn before installation to prevent unexpected injuries. Pick an area free of hazardous condition before you start on the project. Please use tools and power tools responsibly any loss of control and accident deaths may occur due to abuse of tools. Please make sure all hardware is secured on to the door is sufficiently tight. Doors with loose hardware may result in unexpected serious injuries.
HARDWARE INCLUDED Different track length comes with different hardware quantity. Please be sure to check the hardware you should have before installation. Hanger/Roller 2 Box contains: Steel Hanger/Roller (4) Flat Track Hex Bolt (8), Acorn Nut (8), Washer (16) Anti-Jump Pad (4), Floor Guide (2) Spacer, Lag Bolt, and Washer Set Door Stopper (2), Hex Wrench (1) Junction Plate Bracket Double Track Bypass Door Hardware Kit Includes Part Name Picture 4FT 4.5FT 5FT 5.5FT 6FT 6.6FT 7FT 7.
TYPE OF HANGERS 1 5/8’’ 1 5/8’’ 1 5/8’’ 1 5/8’’ Classic Straight 1 5/8’’ Star 1 5/8’’ Gear 1 5/8’’ Imperial Anchor 1 5/8’’ Flame 1 5/8’’ Bucks 1 1/8’’ Arrow 1 5/8’’ Twig 1 5/16’’ Diamond 1 5/8’’ Mustache 1 5/8’’ Royal 3 1/2’’ Horns 1 1/4’’ 3 11/16’’ Horseshoe Black Wheel T-shape www.homacer.
INSTRUCTIONS ③ ② 3 63 4 ① 63 4 3 If your track comes in 2pcs or more, install the junction plate on to each two tracks like the diagram shown here. REMINDER: Depth of first track to wall is 1 3/8”. If you have a door trim be sure to use a header that has the same thickness of your trim before installation of the track or a second option would be a 3/4” spacer extenders which we can offer when requested so the door can clear off the door trim when sliding.
Connect the two L brackets using the bracket connerctors as shown in the picture. 6 Drill the holes for the hanger according to the dimension given in the picture. The distance between the top edge of the door and the center of the upper hole is 1 5/8”. The distance between the side edge of the door and the hanger is up to your choice. Typically around 2” to 4”. Next, install the hex bolts and acorn nuts as shown in the picture.
Install the anti-jump pads as shown in the picture. 9 To mount your doors onto the track, you will have to lift your door at a slight angle and rest both wheel grooves onto the top of the track carefully. Notice: Please repeat Step 7 to Step 12 again for your second door installation.
SLIDING HARDWARE / BARN DOORS High Quality Exquisite Design Outstanding Services ABOUT US At Homacer, our goal is to provide the finest sliding barn door hardware products and services for our valued customers. We keep polishing our products to make their quality better, prices lower and installation easier. We make it possible for you to get everything you need from us when you think about installing sliding barn doors. CONTACT US Office #: 1(770) 864-5437 Website: www.homacer.
