Hardware Kit: Allen wrench TV Plate Wall Plate Plastic Cover A-C -2- ID A B Qty 4 4 C D E F 4 4 4 2 G H 2 4 D E F G H Description M 4 × 25 mm B olt M5× 25 mm B olt M6× 25 mm B olt Drywall bolt Concrete Anchor Fastener Spacer Washer -7-
Lift the screen and hook spacers(F) on to the wall plate. Fasten the bottom of the screen to wall plate using two selected bolts and two spacers(G). Tighten bolts firmly. Do not overtighten. NOTE: Allen wrench may be needed to adjust the swivel of the mount. Part 1a-Wood Stud Mounting Use wall plate as a template, make sure it is level, and mark four mounting holes on the wood studs. Drill four 3/16 ” (4.5mm)dia . holes 2 ” (50mm) deep.
Part 1b-Concrete Wall Mounting Part 2-Attaching Screen to TV plate Level wall plate and use wall as a template to mark four holes. Drill four 7/16 ” (10.5mm) dia. holes 2 ” (50mm) deep. Insert four anchors(E) into holes and secure wall plate with four long bolts(D) and four washers(H).Tighten bolts firmly. Do not overtighten . Select the small(A), medium(B) or large(C) bolts. Attach two spacers(F) to the top two mounting holes on the back of the screen using two of the selected bolts.