User guide

Model ATRT-01 (v) Operating Instructions
Rev 02
May 02, 2002
15
17.0 Test Transformer Selection
XFMR CONFIGURATION:
1.SNGL PHS 2.dT-Y
2.Y-dT 4.dT-dT
5.Y-Y
Figure 17-0 Transformer Selection menu
a. Description: This menu allows the user to select a particular transformer to be tested. If the user
selects a three-phase transformer, the ATRT-01 will display hookup instructions (ATRT-01 cables
to the transformer terminal bushing) for phases A, B, and C.
b. Origin: XFORMER CONFIGURATION menus display as a result of pressing key 1 from the
start-up menu (see Figure 16.0).
c. Action Option: Press key 1, 2, 3, 4, or 5, depending upon the transformer configuration to be
tested. Press STOP to return to the start-up menu.