User guide

Model ATRT-01 (v) Operating Instructions

Rev 02

May 02, 2002

24.0 Enable Computer Interface

COMPUTER ITF MODE

*** CAUTION! ***

CABLE MAY HAVE VLTG

“STOP” TO ABORT

Figure 24-0. Select Computer Interface Display

a. Description: ATRT-01 testing can be remotely controlled via an IBM-compatible PC through an

RS-232C port. In this mode, the Transformer Analysis software provided with the ATRT-01 is

used to test transformer windings.

b. Origin: On the Start-up Menu (see Figure 16-0), press key 2 (SET UP); then, on the next

display, press key 2 (COMPUTER CONTROL) to show the COMPUTER ITF MODE display (the

ATRT-01 testing remains under computer control for as long as this screen displays).

c. Action Option: Press STOP to abort computer control and return to the Start-up menu.