Owner's manual

ATRT-01 S2, ATRT-01B S2, AND ATRT-01D S2 USER’S MANUAL REV 2
26
The Phase A test results will be displayed on the LCD screen when testing has finished:
Press the [ENTER] key to continue.
g. The following screen will be displayed showing the Phase B cable connections for the
selected test:
Make the cable connections per the instructions and then press the [START] key to
run the Phase B test.
h. The following screen will be displayed while the test is being performed:
The Phase A and B test results will be displayed on the LCD screen when testing has
finished:
Line 1 of the results shows the Phase A test results, and line 2 shows the Phase B test
results.
Press the [ENTER] key to continue.
i. The following screen will be displayed showing the Phase C cable connections for the
selected test:
Make the cable connections per the instructions and then press the [START] key to run
the Phase C test.
CABLE PHS-C XFMR
X1,X2 to X3,X0
H1,H2 to H3,H2
“START” TO RUN TEST
RATIO mA % DIFF
+15.003 001 0.02
+15.015 001 0.10
“ENTER” TO CONTINUE
DYN 1 TRANSFORMER
PLEASE WAIT...
CABLE PHS-B XFMR
X1,X2 to X2,X0
H1,H2 to H2,H1
“START” TO RUN TEST
RATIO mA % DIFF
+15.003 001 0.02
“ENTER” TO CONTINUE