Owner's manual

REV 2 CT-7500 S2 USER’S MANUAL
20
d. The following screen will be displayed:
Type the company name using the alpha-numeric keypad.
When pressing a key, the corresponding number on the key will be displayed first.
Pressing the key again will display the first letter on the key. Pressing the key again will
display the second letter on the key. For example, to type the letter “A”, you must press
the
[2] key twice. To erase the character at the cursor position, press the [CLEAR] key.
Press the
[PAPER ∧ Contrast] key to move to the next character. Press the [PAPER
∨ Contrast]
key to move to the previous character. Press the [ENTER] key when you
are done typing the company name.
e. The following screen will be displayed:
Type the station name using the alpha-numeric keypad and then press the [ENTER]
key.
f. The following screen will be displayed:
Type the circuit information using the alpha-numeric keypad and then press the
[ENTER] key.
g. The following screen will be displayed:
Type the manufacturer name using the alpha-numeric keypad and then press the
[ENTER] key.
MANUFACTURER:
↑↓ TO POSITION
“ENTER” TO ACCEPT
CIRCUIT:
↑↓ TO POSITION
“ENTER” TO ACCEPT
STATION:
↑↓ TO POSITION
“ENTER” TO ACCEPT
COMPANY:
↑↓ TO POSITION
“ENTER” TO ACCEPT