Owner's manual

CT-7500 S2 USER’S MANUAL REV 2

3.1.11. Configuring the Automatic Printing Feature

The CT-7500 S2 can be configured to print graphs and tabulated results automatically after each

test. To configure the automatic printing feature:

a. Start from the “START-UP” menu:

Press the [3] key (SETUP).

b. The following screen will be displayed:

Press the [4] key (NEXT PAGE).

c. The following screen will be displayed:

Press the [4] key (NEXT PAGE).

d. The following screen will be displayed:

Press the

[1] key (SET PRINT MODE).

e. The following screen will be displayed:

Press the

[1] key (AUTOMATIC PRINT) if you would like to automatically print tabulated

and graphic results after each test is performed.

Press the [2] key (BY REQUEST ONLY) to turn off automatic printing of test results.

Please see section 3.2.5 for instructions on how to manually print test results.

SET PRINT MODE:

1. AUTOMATIC PRINT

2. BY REQUEST ONLY

1. SET PRINT MODE

2. SET 50/60 Hz

1. SHOT DESCRIPTION

2. NUMBER OF CHANNELS

3. SET DATE & TIME

4. NEXT PAGE

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. NEXT PAGE

1. TIME BRKR 02/17/11

2. GET RSLT 14:16:11

3. SETUP

4. DIAGNOSTICS