Owner's manual

CT-7500 S2 USER’S MANUAL REV 2

3.2.5. Printing or Viewing Timing Results

Follow the steps below to print or view the timing results after performing a circuit breaker

timing test:

a. After performing a timing test you will be returned to the “START-UP” menu:

Press the [2] key (GET RSLT).

b. The following screen will be displayed:

1. PRINT TEST RESULTS

Press the [1] key to view the test results on the screen or to print the tabulated test

results WITHOUT the graph. The following screen will be displayed:

Press the [1] key (THERMAL PRINTER) to print the tabulated test results on the

built-in thermal printer. The tabulated results will be printed, and you will be

returned to the “START-UP” menu. A typical tabulated results printout is shown in

Figure 20.

Press the

[2] key (DISPLAY RESULTS) to display the test results on the unit’s LCD

screen. The following screen will be displayed:

Press the

[PAPER ∧ Contrast] and [PAPER ∨ Contrast] keys to scroll

through the test results. Press the

[STOP] key to return to the “START-UP”

menu.

UP/DWN ARROWS TO

SCROLL RESULTS...

“STOP” TO EXIT

SELECT PRINTER:

1. THERMAL PRINTER

2. DISPLAY RESULTS

1. PRINT TEST RESULTS

2. PLOT FULL CHART

3. PLOT EXPANSION

4. PLOT 0 – 200MS

1. TIME BRKR 02/25/11

2. GET RSLT 09:04:05

3. SETUP

4. DIAGNOSTICS