Owner's manual

REV 2 CT-7500 S2 USER’S MANUAL

3.3.3. Recalling a Test Record from the Flash EEPROM

Follow the steps below to recall a test record from the CT-7500 S2’s Flash EEPROM:

a. Start from the “START-UP” menu:

Press the [3] key (SETUP).

b. The following screen will be displayed:

Press the [3] key (SAVE / RESTORE)

c. The following screen will be displayed:

Press the [2] key (RESTORE SHOT).

d. The following screen will be displayed:

Using the keypad, type the record number that you would like to restore. If you do not

know the record number, you can first print a test record directory using the

instructions in section 3.3.2. Press the [ENTER] key.

e. A confirmation screen will be displayed with some details about the selected test as

shown below:

Press the [ENTER] key.

RESTORING SHOT #1

TEST: STATIC RES

DATE: 03/11/10 13:26

“ENTER” TO CONFIRM

ENTER SHOT NUMBER

TO BE RESTORED

“ENTER” TO CONFIRM

1. SAVE SHOT

2. RESTORE SHOT

3. SHOT DIRECTORY

4. ERASE SHOT

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. NEXT PAGE

1. TIME BRKR 02/10/11

2. GET RSLT 09:04:05

3. SETUP

4. DIAGNOSTICS