Owner's manual

REV 2 CT-7500 S2 USER’S MANUAL

3.3.4. Deleting Test Records from the Flash EEPROM

You can delete one or all test records stored in the CT-7500 S2’s Flash EEPROM. To delete test

records:

a. Start from the “START-UP” menu:

Press the [3] key (SETUP).

b. The following screen will be displayed:

Press the [3] key (SAVE / RESTORE).

c. The following screen will be displayed:

Press the [4] key (ERASE SHOT).

d. The following screen will be displayed:

1. ERASE SHOT

Press the [1] key if you would like to erase a single shot from the Flash EEPROM.

The following screen will be displayed:

Using the numeric keypad, type the test record number that you would like to

erase. If you do not know the record number, you can first print a test record

directory using the instructions in section 3.3.2. Press the [ENTER] key.

ENTER SHOT NUMBER

TO BE ERASED

“ENTER” TO CONFIRM

1. ERASE SHOT

2. ERASE ALL SHOTS!

1. SAVE SHOT

2. RESTORE SHOT

3. SHOT DIRECTORY

4. ERASE SHOT

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. NEXT PAGE

1. TIME BRKR 02/10/11

2. GET RSLT 09:04:05

3. SETUP

4. DIAGNOSTICS