Manual

REV 2 TTRA-S2 VERSION 1.x SOFTWARE MANUAL

4.8 Working with Tabulated Test Results

Once a test record has been retrieved (see sections 4.1 and 4.2 for instructions), the record

details will be displayed as shown:

The menus on the menu bar will also change to provide additional options relevant to working

with a test record.

NOTE

You can edit the test record header information (such as Company, Location,

Circuit, Operator, etc.) by entering data in the corresponding fields at the top of

the screen.

You can also edit the H Voltage, H Tap, X Voltage, and X Tap values. If these

values are changed, the calculated ratio and deviation will be automatically re-

calculated by the TTRA-S2 software.

4.8.1. Printing the Tabulated Test Results

To print the tabulated test results:

1. Click on the Print menu. The print dialog box will appear.

2. Select the printer to print to and make any necessary changes to the printer’s

parameters and then click on the “OK” button. The test results will be printed. A sample

test record printout is shown in Figure 3.