User Manual

ManualsBrandsVarad ManualsCarILS200 / ILS300 - Color Changing Interior Lighting System

ORB

COLOR CHANGING

LED INTERIOR

LIGHTING SYSTEM

IM-ILS300v1

Installation Manual

WWW.VARAD.COM

Warranty

VARAD’s product warranty covers against breakage due to

defects in materials or workmanship for one year from the

date of purchase. Warranty is only valid with proof of purchase

from an Authorized VARAD Dealer. VARAD’s warranty program

does not cover cosmetic damage, and damage due to acts of

God, accident, misuse, abuse or negligence to the product.

Repair or replacement as provided under this warranty is the

exclusive remedy of the consumer. VARAD shall not be liable

for any incidental or consequential damage for breach of any

express or implied warranty on this product. Except to the

extent provided by this warranty or prohibited by applicable

law, there are no implied nor expressed warranties or

merchantability or fitness for a particular purpose of this

product.

In order to provide you with prompt warranty service and

technical support please register your product on line at

www.varad.com/register. Be sure to have your product serial

number ready. This can be found on the bottom of the digital

controller.

Send us your photos

We would love to have pictures of your install on our street

gallery. Go to www.varad.com/street-gallery.html for more

information.

ILS200 ILS300

Summary of content (10 pages)

PAGE 1
Register your product In order to provide you with prompt warranty service and technical support please register your product on line at www.varad.com/register. Be sure to have your product serial number ready. This can be found on the bottom of the digital controller. Send us your photos We would love to have pictures of your install on our street gallery. Go to www.varad.com/street-gallery.html for more information.
PAGE 2
General Thank you for purchasing the ORB / ILS color changing LED interior lighting system from VARAD. To ensure proper use, please read this manual prior to installation. The ILS200 & ILS300 demonstrates the innovation and technical abilities of the engineering team at VARAD. Our latest kit combines superior functionality with sleek product styling to put your ride at the forefront of the tuner scene.
PAGE 3
Networking Multiple Systems Step 3: Push button once to turn LED no.4 “ON”. Precautions To prevent fire or shock hazard, do not expose the digital controller to rain or moisture. To avoid electrical shock, do not open the digital controller. Refer servicing to a factory authorized dealer. Replace the fuse only with the type provided in the fuse holder. Failure to do so can cause malfunction. Network mode is now “Active”. Step 4: To exit set up mode - Push and hold button until all LED’s turn “OFF”.
PAGE 4
Technical Specifications Networking Multiple Systems Colors: 1000 Patterns: 10 Scanning, 2 Strobe, 2 breathing Auto Color Change, 8 preset colors Music Reactor Frequencies: 40hz, 80hz, 120hz Network ready for multiple systems Auxiliary input for trigger with +12v Each ULX310C controller features a built in “network ready” feature. This feature allows multiple systems to be installed at the same time on large vehicles such as SUV’s, Limousines, Semi’s, RV’s and Marine applications.
PAGE 5
Mode Features Mode 1 • Color Selection Mode 1 allows you to select the system color. To set system color push the button momentarily and the digital controller will start to cycle thru 1000 colors. Each time you push the button momentarily the system will stop or start the color changing. Stopping at any particular color will define your system color. The system color will be used for certain patterns in mode 2 and mode 3.
PAGE 6
ULX310C Digital Controller Description Mode Operation flow chart “Push and Hold” to change modes Release button when mode LED is illuminated No Illuminated LED’s OFF LED 1 “ON” Power Harness Wired Remote Control MODE 1 COLOR CHANGING Wireless Remote Controller RC100 (optional ILS200) LED Lightbars LED 2 “ON” momentarily MODE 2 SCANNING/STROBE LED 3 “ON” MODE 3 MUSIC REACTOR 3 12
PAGE 7
Operation of ILS system continued ULX300RC Remote Control Description There are three modes of operation: Mode / Pattern select button Mode 1 - Color Selection Mode 2 - Scanning patterns/strobe/Preset colors Mode 3 - Music Reactor Refer to “Mode Features” on page 13 for details on features for each mode. Turning system “OFF” Mode 1 LED indicator To turn the system “off” quickly, push and hold button until all lights on the remote control turn “off”. This will take a few seconds only.
PAGE 8
Operation of ILS system Required tools The ILS system is operated with a single button remote control. All features can be controlled by two types of button operations: • Wire stripper • Wire cutter • “Push and Hold” (greater than 1 second) to change modes. Installation of LED lightbars • “Push and release” (momentary) to change features in selected mode. Visually inspect the interior your vehicle to determine a suitable location for mounting each LED lightbar.
PAGE 9
Wiring Schematic Continued Installation of Controllers Install the Digital Controller inside the vehicle. Find a location that will allow all the wires to the LED lightbars to connect without binding. The location should be 36” from where you decide to install the wired remote control. The wired remote control should be installed in a location within reach of the driver. For use of the RC100 (optional with ILS200) make sure you have a direct line of eyesight for the infra red remote reciever.
PAGE 10
Wiring Schematic See “Wiring Schematic Continued Page 9” Front of vehicle • There are no specific plug locations for plugging in the LED light bars.