User Manual

Thank you for purchasing the ORB / ILS color changing LED interior
lighting system from VARAD. To ensure proper use, please read this
manual prior to installation.
The ILS200 & ILS300 demonstrates the innovation and technical
abilities of the engineering team at VARAD. Our latest kit combines
superior functionality with sleek product styling to put your ride at
the forefront of the tuner scene. With stylized low profile LED
lightbars, digital control module and a sleek wired hand-held
controller, you can generate a mind blowing 1000 colors. With our
patent pending new system configuration, optimum color bleed is
achieved using our latest high flux 180 degree LED’s. These new high
flux LED’s allow us to use fewer LED’s than those found in typical
applications to provide a more uniform and superior color blend. If
you demand the latest in lighting technology, VARAD will take you
there - Enjoy!.
General
• 1000 colors.
• 10 Scanning, 2 Strobing and 2 Breathing patterns.
• Auto Color changing pattern and 8 preset selectable colors.
• Selectable Music Reactor frequencies (40hz, 80hz, 120hz).
• Network of multiple systems.
• Remote control acts as a SCANNERS™ Visual Theft Deterrent
when ignition is turned off.
• Auxiliary input lighting - alarm system or courtesy light.
• Compact digital controller for ease of installation.
• Wired remote control with LED’s that indicate color and pattern.
• Connectors on all LED lightbars for quick install.
• Wireless infra red remote control - RC100. (Optional with the
ILS200)
Features
Warrant
16
Trouble Shooting
System does not turn “ON”
Check to see that the ribbon cable from the remote
controller is fully inserted into the controller.
Check “Ignition Wire”, make sure it is getting constant 12
volts positive when engine is “ON”.
Check fuse. If fuse looks bent or blown replace with a 5amp
fast acting glass fuse.
Make sure that ribbon cable from remote control is not
pinched or damaged.
LED lightbar does not work.
Check to see that cable between LED lightbar and controller
is not damaged.
Plug into another port to verify that it is the LED lightbar.
A Section of my LED lightbar is not working
Plug LED lightbar into another port to verify that it is the LED
lightbar.
Check to see that all the wires on the LED lightbar connector
are fully inserted into the header.
For technical support:
Check website www.varad.com
or email questions to: [e-mail]