User Manual

Operation of ILS system continued
There are three modes of operation:
Mode 1 - Color Selection
Mode 2 - Scanning patterns/strobe/Preset colors
Mode 3 - Music Reactor
Refer to “Mode Features” on page 13 for details on features for
each mode.
11 4
ULX300RC Remote Control Description
Mode / Pattern select button
Mode 1 LED indicator
Mode 2 LED indicator
Mode 3 LED indicator
System Color LED
The remote control also indicates the scanning pattern with each
of the 5 LED’s. Each LED on the remote control corresponds to a
section of the LED lightbar. The color of the Scanning pattern is
shown with the system color LED.
The remote control will flash a Scanning pattern when ignition is
turned off. Only the four red LED’s will scan back and forth!
(This feature cannot be deactivated)
ULX300RC - Visual Theft Deterrent
Turning system “OFF”
To turn the system “off” quickly, push and hold button until all
lights on the remote control turn “off”. This will take a few
seconds only.
When connected to an alarm system or interior light source:
System will activate red leds each time a +12v trigger is applied to the orange
auxiliary input wire. This function only operates when the ignition is “off ”.
Auxiliary lighting