Specification

TECHNICAL DATA VAR-41
VARATHANE
®
WOOD STAIN
Form: GDH-751
Rev.: 031315
1
.DESCRIPTION AND USES .
Varathane
®
Wood Stain is a premium, high performance stain
system enhanced with nano pigments for excellent color
clarity. Nano pigments provide rich, even color without the use
of a wood conditioner. Varathane Wood Stain provides fast
dry times and seals the wood.
Varathane Wood Stains can be used on all interior wood
projects including furniture, cabinets, doors and trim, floors
and paneling.
FEATURES .
 Dries in one hour
 Achieve color in one coat
 Enhances wood grain
.
PRODUCTS .
SKU Description
266156 1-Quart Sunbleached
266157 1-Quart Cabernet
266158 1-Quart Summer Oak
266161 1-Quart Kona
266163 1-Quart Early American
266165 1-Quart Black Cherry
266167 1-Quart Dark Walnut
266170 1-Quart Golden Oak
266172 1-Quart American Walnut
266174 1-Quart Traditional Cherry
266179 1-Quart Golden Mahogany
266180 1-Quart Light Walnut
266256 1-Quart Ebony
266257 1-Quart Provincial
266259 1-Quart Red Oak
266260 1-Quart Golden Pecan
266261 1-Quart Colonial Maple
266262 1-Quart Red Mahogany
266299 1-Gallon Kona
266301 1-Gallon Traditional Cherry
266302 1-Gallon Golden Oak
266303 1-Gallon Dark Walnut
266306 1-Gallon Light Walnut
267124 1-Quart Weathered Gray
267140 1-Quart Honey Maple
271146 1-Quart Carrington
271150 1-Quart Cognac
271151 1-Quart Ash
.PRODUCT APPLICATION .
SURFACE PREPARATION
Proper surface preparation is important. Please follow
instructions thoroughly. Surfaces must be clean, dry and
sound. Remove any existing finishes with sandpaper or
stripper. Prepare bare wood for staining by sanding in the
direction of the grain. Begin with #120 grit sandpaper and
progress through #150 and #180 grits. Before staining,
remove all sanding dust with a vacuum and all dirt,
grease or glue with a clean rag dampened with mineral
spirits.
.PRODUCT APPLICATION (cont.) .
WARNING! If you scrape, sand or remove old paint, you may
release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD
DUST CAN CAUSE SERIOUS ILLNESS SUCH AS BRAIN
DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT
WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a
NIOSH-approved respirator to control lead exposure. Clean
up carefully with a HEPA
vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the National
Lead Information Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
TESTING COLOR
Be sure to test the stain to verify the desired color. To test,
apply the stain in an inconspicuous area. For a deeper color,
additional coats may be required.
APPLICATION
Stir the contents or shake the container before use. Use when
temperatures are between 60-90°F (16-32°C) and humidity is
less than 85%. Allow longer dry times for damp, humid days.
Apply a test sample on a small inconspicuous area before
proceeding with the entire job. Apply one coat of stain liberally
with a brush or a clean lint-free rag. Allow to penetrate for 5-
10 minutes; then remove excess by wiping with a rag in the
direction of the grain. Removal of all excess material is
essential to ensure proper dry time and proper adhesion to
the wood.
PROTECTING THE WOOD
To complete your wood project and for best protection, finish
with any Varathane Polyurethane depending on your project
needs.
COVERAGE
Each quart will cover approximately 225-275 square feet.
Each gallon will cover approximately 1,00-1,100 square feet.
Coverage may vary depending on the applicator and the
porosity of the wood.
DRY TIME
Dry times are based on 70°F and 50% relative humidity. For
best results allow stain to dry at least 1 hour then apply
Varathane Polyurethane. Darker colors may require a slightly
longer dry time.
CLEAN-UP
Clean application tools and equipment with mineral spirits.