Operation Manual

Driving and operating 123
System operation
When shifting into R, the image of the
area behind the vehicle appears in
the Colour-Info-Display with the
message Check surroundings for
safety. The previous screen displays
approx. 10 seconds after shifting out
of R.
To cancel the delay, do one of the
following:
■ Press a button on the infotainment
system.
■ Shift into P.
■ Reach a vehicle speed of 5 mph.
Activation and deactivation
To turn the rear view camera system
on or off:
1. Shift into P.
2. Press the CONFIG button on the
instrument panel.
3. Select display.
4. Select camera. When a
checkmark appears next to
camera, then the rear view
camera system is on.
Symbols
The navigation system may have a
feature that lets the driver view
symbols on the navigation screen
while using the rear view camera. The
ultrasonic parking assist system must
not be disabled to use the caution
symbols. An error message may be
displayed if ultrasonic parking assist
has been disabled and the symbols
have been turned on.
The symbols appear and may cover
an object when viewing the
navigation screen when an object is
detected by the ultrasonic parking
assist system.
To turn the symbols on or off:
1. Shift into P.
2. Press the CONFIG button on the
instrument panel.
3. Select Display.
4. Select Symbols. When a
checkmark appears next to
Symbols, symbols will appear.
Guiding lines
The rear view camera system has a
guideline overlay that can help the
driver align the vehicle when backing
into a parking spot.
To turn the guidelines on or off:
1. Shift into P.
2. Press the CONFIG button on the
instrument panel.
3. Select Display.
4. Select Guiding lines. When a
checkmark appears next to
Guiding lines, guidelines will
appear.