Operation Manual

126 Driving and operating
9 Warning
If the capacity of the electrical
circuit or AC socket is not known,
only use charge level 1 until the
circuit capacity has been
inspected by a qualified
electrician. Using a charge level
that exceeds either the electrical
circuit or the AC outlet capacity
may start a fire or damage the
electrical circuit.
Electrical requirements 3 131.
Colour-Info-Display 3 73.
Charge cord 3 128.
4. Plug in the vehicle plug of the
charge cord into the charge port
on the vehicle. Verify that the
charging status indicator
illuminates on top of the
instrument panel and a horn chirp
occurs.
Charging status 3 127.
5.
Press e on the radio remote
control to arm the charge cord
theft alert.
Radio remote control 3 20.
Vehicle personalisation 3 82.
End charge
1.
Press c on the radio remote
control to disarm the charge cord
theft alert.
Radio remote control 3 20.
2. Unplug the vehicle plug of the
charge cord from the vehicle by
squeezing the vehicle plug lever
and pull to remove.
3. Close the charge port door.
4. Unplug the charge cord from the
electrical outlet.