Operation Manual

Driving and operating 131
Two charge levels are available by
pressing the charge level button.
Select charge level 1 or charge level
2.
Colour-Info-Display 3 73.
Level 2: All four charge level
indicators will be lit. The charging
current of this level is 10 ampere.
Level 1: Two charge level indicators
will be lit. The charging current of this
level is 6 ampere.
Vehicle plug
The vehicle plug attaches to the
charge port on the vehicle. There is a
flashlight built into the vehicle plug
that can be used by squeezing the
vehicle plug lever. The flashlight will
turn off when the connection is
complete and the lever is released.
Adapters
9 Warning
Using damaged adapters or
adapters not designed for use with
the charge cord may increase the
risk of electric shock or start a fire.
Only use adapters that have been
designed to be used with the
charge cord.
Do not use a damaged adapter.
An adapter kit may be included to
allow use of your charge cord in
multiple countries in central Europe.
When using an adapter make sure
the charge level selected is
appropriate for your supply circuit.
See the reference card included in the
adapter kit.
Electrical requirements
Notice
Do not use portable or stationary
backup generating equipment to
charge the vehicle. This may cause
damage to the vehicle's charging
system. Only charge the vehicle
from utility supplied power.
The AC socket must have a
grounded, dedicated, 16 ampere
(13 ampere in some countries) or
greater, 3 pin wall plug. That means
there should be no other major
appliances connected to the same
circuit. If it is not a dedicated circuit,
the current rating of the outlet circuit
breaker could be exceeded and
cause it to trip or open.
Two charge levels are possible with
the charge cord supplied with the
vehicle 3 128. The normal charge
level (level 2) will draw a maximum of