Operation Manual

138 Vehicle care
Bonnet
Opening
1. Switch off the ignition before
opening the bonnet. If the ignition
is switched on, the engine will
start when the bonnet is opened.
Electric vehicle operation modes
3 107.
2. Pull the release handle and return
it to its original position.
3. Push the safety catch in the
engine compartment to the right
and open the bonnet.
4. Release the bonnet prop rod from
its retainer above the radiator
support and place it securely into
the slotted retainer in the bonnet.
Closing
Before closing the bonnet, press the
bonnet prop in its retainer.
Lower the bonnet and allow it to drop
into the catch. Check that the bonnet
is engaged.
Engine oil
Check the engine oil manually on a
regular basis to prevent damage to
the engine. Ensure that the correct
specification of oil is used.
Recommended fluids and lubricants
3 174.
Check with the vehicle on a level
surface. The engine must be at
operating temperature and switched
off for at least 5 minutes.
Pull out the dipstick, wipe it clean,
insert it to the stop on the handle, pull
out and read the engine oil level.