Operation Manual

162 Vehicle care
Note the expiry date of the kit. After
this date its sealing capability is no
longer guaranteed. Pay attention to
storage information on sealant
bottle.
Replace the used sealant bottle.
Dispose of the bottle as prescribed
by applicable laws.
The compressor and sealant can be
used from approx. -30 °C.
Using the tyre repair kit
The tyre repair kit has two hoses. The
black sealant/air hose is intended to
temporarily seal and inflate a
punctured tyre, the clear air only hose
is intended to inflate a not punctured
tyre without sealant.
Follow the directions closely for
correct usage:
1. Take the tyre repair kit from the
compartment.
2. Sealant and air hose: Unwrap the
black sealant/air hose and the
power plug.
Air only hose: Unwrap the clear air
only hose and the power plug.
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground so
the hose will reach it.
4. Remove the valve stem cap from
the flat tyre by turning it
counterclockwise.
5. Attach the black sealant/air hose
or the clear air only hose onto the
tyre valve stem. Turn it clockwise
until it is tight.
6. Plug the power plug into an
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
Power outlets 3 61.
Do not pinch the power plug cord
in the door or window.
7. Start the vehicle. The vehicle
must be running while using the
air compressor.