Operation Manual

Vehicle care 163
8. Sealant and air hose: Turn the
selector switch counterclockwise
to e.
Air only hose: Turn the selector
switch clockwise to g.
9. Press m to turn the tyre repair kit
on.
Sealant and air hose: The
compressor will inject sealant and
air into the tyre. The pressure
gauge will initially show a high
pressure while the compressor
pushes the sealant into the tyre.
Once the sealant is completely
dispersed into the tyre, the
pressure will quickly drop and
start to rise again as the tyre
inflates with air only.
Air only hose: The compressor will
inflate the tyre only with air.
10. Inflate the tyre to the
recommended inflation pressure
using the pressure gauge.
Tyre and loading information label
3 156.
Tyre pressures 3 183.
The pressure gauge may read
higher than the actual tyre
pressure while the compressor is
on. Turn the compressor off to get
an accurate pressure reading.
The compressor may be turned
on/off until the correct pressure is
reached.