Operation Manual

Vehicle care 165
11 under using of the air only
hose.
If the tyre pressure has fallen
more than 0.7 bar below the
recommended inflation pressure,
stop driving the vehicle. The tyre
is too severely damaged and the
tyre sealant cannot seal the tyre.
If the tyre pressure has not
dropped more than 0.7 bar from
the recommended inflation
pressure, inflate the tyre to the
recommended inflation pressure.
19. Sealant and air hose: Wipe off any
sealant from the wheel, tyre and
vehicle.
20. Sealant and air hose: Dispose of
the used sealant canister and the
black sealant/air hose assembly
at a local dealer or in accordance
with local laws and practices.
21. Sealant and air hose: Replace it
with a new canister available from
a workshop.
22. Sealant and air hose: After
temporarily sealing a tyre using
the tyre repair kit, take the vehicle
to a workshop within a 100 miles
of driving to have the tyre repaired
or replaced.
The tyre repair kit has an accessory
adapter located in a compartment on
the bottom of its housing that may be
used to inflate air mattresses, balls,
etc.
Removal and installation of the
sealant canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from a
workshop.
5. Push the new canister into place.