Operation Manual

Vehicle care 167
Do not lean over the battery during
jump starting.
Do not allow the terminals of one
lead to touch those of the other
lead.
The vehicles must not come into
contact with each other during the
jump starting process.
Apply the parking brake, move the
shift lever in P.
Battery terminals in the engine
compartment
The battery terminals to jump start the
vehicle are located in the engine
compartment. The positive battery
terminal is located below a access
cover. Open the cover everytime you
want to jump start the vehicle. The
negative battery terminal is a stud
marked GND.
Battey terminals in the load
compartment
The battery terminals to jump start
another vehicle are located in the load
compartment below two access
covers. Open and remove the access
covers everytime you want to jump
start another vehicle. The positive
battery terminal is covered with an
additional access cover, marked with
a <. Open the access cover
everytime you want to use the
positive battery terminal.
Jump starting
Jump starting the vehicle