Operation Manual

40 Seats, restraints
There is one guide for each rear seat.
When using a comfort guide, remove
the seat belt from the seat‐mounted
guide before using the comfort guide.
Installation:
1. Remove the guide from its
storage clip on the interior body
trim next to the rear seat.
2. Place the guide over the belt, and
insert the two edges of the seat
belt into the slots of the guide.
3. The seat belt should not be
twisted and it should lie flat. The
elastic cord must be under the
seat belt and the guide on top.
9 Warning
A seat belt that is not properly
worn may not provide the
protection needed in a crash. The
person wearing the seat belt could
be seriously injured. The shoulder
belt should go over the shoulder
and across the chest. These parts
of the body are best able to take
belt restraining forces.
4. Buckle and position the seat belt
as described previously in this
section. Make sure that the
shoulder belt crosses the
shoulder.
5. To remove and store the comfort
guide, squeeze the seat belt
edges together so that the seat
belt can be removed from the
guide. Slide the guide back into its
storage clip.