Operation Manual

50 Seats, restraints
ISOFIX child restraint
systems
Fasten vehicle-approved ISOFIX
child restraint systems to the ISOFIX
mounting brackets.
ISOFIX mounting brackets are
indicated by a label & on the
backrest.
Top-tether fastening eyes
The Top-tether anchors for outboard
rear seating positions are on the back
of the rear seatback. Be sure to use
an anchor on the same side of the
vehicle as the seating position where
the child restraint will be placed.
Top-tether fastening eyes are marked
with the symbol : for a child seat.
In addition to the ISOFIX mounting,
fasten the Top-tether strap to the
Top-tether fastening eyes. The strap
must run between the two guide posts
of the head restraint.