Operation Manual

Instruments and controls 69
If the control indicator does not go out
after a few seconds, or if it illuminates
while driving, there is a fault in the
ABS. The brake system remains
operational but without ABS
regulation.
Try to reset the system.
To reset the system:
1. Move out of the flow of traffic as
quickly as possible without
impeding other vehicles.
2. Place the vehicle in P.
3. Switch the ignition off.
4. Restart the vehicle.
When the ABS control indicator
remains on after resetting the system
or comes on again while driving, seek
the assistance of a workshop.
Antilock brake system 3 113.
Should the warning lights of the ABS
and the regular brake system come
on, the vehicle may have a problem
with the regular and the antilock
brakes.
Have the vehicle towed for service.
Towing 3 169.
Sport mode
Sport illuminates when sport mode is
selected.
Sport mode 3 108.
Mountain mode
Mountain illuminates when mountain
mode is selected.
Mountain mode 3 108.
Hold mode
Hold illuminates when hold mode is
selected.
Hold mode 3 108.
Electronic Stability Control
off
a illuminates yellow.
The system is deactivated.
Electronic Stability Control
and Traction Control
system
b illuminates or flashes yellow.
Illuminates
A fault in the system is present.
Continued driving is possible. Driving
stability, however, may deteriorate
depending on road surface
conditions.
Have the cause of the fault remedied
by a workshop.
Flashes
The system is active and is working to
assist the driver with directional
control of the vehicle in difficult driving
conditions.
Electronic stability control 3 117,
Traction control system 3 116.
Traction Control system off
k illuminates yellow.
The system is deactivated.