Operation Manual

72 Instruments and controls
DIC controls
CONFIG: Press to select either the
simple or enhanced instrument
cluster configuration display.
9 BACK: Press to return to the
previous screen, to exit a screen or
return to the main menu. Press 9
BACK to minimise the DIC menu
display.
SELECT: Press the centre of the
knob to select the highlighted item.
Turn the knob to scroll through the
menu items.
Selecting menus and functions
At the main DIC menu:
1. Turn the SELECT knob to scroll
through the possible DIC menus.
2. Press SELECT knob when a
menu item is highlighted to enter
that menu.
3. Continue to turn and press the
SELECT knob to scroll through
and select the available menu
items:
Trip A 0 and Trip B 1
3 62.
Remaining oil life I
The percentage of remaining oil life is
displayed.
Engine oil 3 138.
Tyre pressure 2
The approximate pressures of all four
tyres are displayed.
If dashes are displayed instead of
values, there may be a problem with
the vehicle.
Seek the assistance of a workshop.
Tyre pressure 3 156.
Tyre pressure monitoring system
3 156.
Vehicle messages 3
Turn the SELECT knob to scroll
through any active warning message.
Press SELECT to review the
messages.
Vehicle messages 3 82.
Unit 7
Turn the SELECT knob to change the
unit display between SI and US.
Press SELECT to confirm the setting.
Tutorial mode T
Press CONFIG to switch between two
tutorial screens that explain some of
the features of the cluster.
Tutorial mode is only available when
the vehicle is in park position P.
Navigation *
Arrow guidances are displayed by
selecting this item.
See the infotainment system manual
for further information.