Operation Manual

74 Instruments and controls
The Power Flow screens indicate the
current system operating condition.
The screens show the energy flow
between the engine, electric drive unit
and high voltage battery. These
components will be highlighted when
they are active.
Charging
Charge mode selection
There are three programmable
charge modes.
From the charge mode status screen,
press Change Charge Mode.
Select one option:
■ Immediately upon plug-in
■ Delayed based on departure time
■ Delayed based on electric rates &
departure time
Programmable charging
The current charge mode status can
also be viewed in a temporary pop-up
in the Colour-Info-Display by pressing
the release button of the charge port
door on the driver door. The Charge
Start and Charge Complete time
estimations are also displayed on the
screen. These estimations are most
accurate when the vehicle is plugged
in and in moderate temperature
conditions.
Charge mode status
Immediately:
The vehicle starts charging as soon
as it is connected to an electrical
outlet.
Charging 3 124.
Delayed (Departure Time):