Operation Manual

88 Lighting
Notice
Do not cover the light sensor
otherwise the AUTO mode will not
operate properly.
Automatic low beam activation
During poor lighting conditions, the
low beam is switched on.
Tunnel detection
When a tunnel is entered, the low
beam is switched on.
High beam
To switch from low to high beam,
push the turn signal lever.
To switch to low beam, push lever
again or pull.
Headlight flash
To activate the headlight flash, pull
the turn signal lever.
Headlight range
adjustment
To adapt headlight range to the
vehicle load to prevent dazzling: turn
thumb wheel ? to required position.
0 = front seats occupied
1 = all seats occupied
2 = all seats occupied and load
compartment laden
3 = driver's seat occupied and load
compartment laden
Hazard warning flashers
Operated with the ¨ button.
In the event of an accident with airbag
deployment, the hazard warning
flashers are activated automatically.