Owner`s manual

Storage 71
Estate
Do not place any heavy or sharp-
edged objects on the load
compartment cover.
Opening
Press handle on load compartment
cover rearwards; the cover
automatically engages in its end
position.
Closing
Remove load compartment cover
from side brackets. It rolls up
automatically.
Pull the cover towards the rear using
the handle and engage it in the
retainers at the sides.
To cover the gap between the load
compartment cover and the rear
backrests, there is a cover on the
cartridge. Attach the two hooks of the
cover to the head restraint guide rods.
If the safety net is mounted, run the
hooks through the net mesh.
Removing
Open the load compartment cover
and detach the hooks from the head
restraints.
Pull the release lever. Lift right side of
cover first, then pull left side out of
recess.
Fitting
Insert the left side of the load
compartment cover in the recess, pull
the release lever, insert the right side
of the load compartment cover and
engage.
Attach the hooks on the head
restraints.