Specifications

12
DEWE-50-USB2-16
Analog output specications (optional)
Power supply
DC NET-202 + accu power supply
The power supply supports DC-UPS function. When the DC supply is lost, the Power LED on the front turns
from green into orange. 30 seconds before the book shuts down, an acoustic beep signal occurs.
DC AVP-2B/K (standard power supply)
Analog output DT 9834 AD-board
Number of outputs4 (routed to Pin 7 of channel 12 to 15)
Resolution 16-bit
Range±10 V
Throughput 500 kS/s/channel
FIFO 128 kS
Current output 5 mA maximum load
Output impendance
0.1 Ω
Protection short circuit to ground
Slew rate
10 V / μs
Nonlienarity 1 LBS
Differential nonlinearity 1 LBS
Acuuracy 0.1 % FSR (adjustable)
Offset drift±10 ppm of FSR / °C
Gain drift ±30 ppm
DC Power supply NET-202 DC + Accu
Input:
DC and battery input:
10 to 32 V
DC
Max. input current:startup peak up to 25 A
Input power: 160 W
Input voltage priority:1. DC voltage
2. Accu
Battery type:
NiCd, 24 V
DC
, 600 mAh
Output:
Output power:160 W
Output voltages:+5 V(max. 20 A) -5 V(max. 0.3 A)
+12 V(max. 5 A) -12 V(max. 0.4 A)
Power LED:
dim green: DC connected to system, system powered off
bright green:DC connected to system, system powered on
orange: system powered on, working via accu
red: starts 30 sec. before accu is getting low together with beep signal
DC Power supplyAVP-2B/K
Input:
DC input:
9 to 40 V
DC
Max. input current:5.6 A
Input power: 160 W
Output:
Output power: max. 51 W
Output voltages:+12 V(max. 2 A) -12 V(max. 2 A)
Protection:Overvoltage protection, excess temperature protection, polarity reversal protection
Fuse:6.3 A