Specifications

20
54321
9876
DEWE-50-USB2-16
CAN bus (AUTO option)
The used CAN device is a vector CANCaseXL.
For detailed information regarding the CAN interface refer to the Vector CANCaseXL manual.
PIN 1: n.c PIN 6: n.c
PIN 2: CAN low PIN 7: CAN high
PIN 3: GND (Vb-) PIN 8: reserved
PIN 4: reserved PIN 9: n.c
PIN 5: shield
9-pin DSUB female connector
Specifications
Microcontroller: ATMEL AT91 (ARM7 TDMI 64 Mhz)
CAN controller:2 x Phillips SJA 1000
CAN version: CAN 2.0B
PC interface: USB2.0
Operatin system:Windows 2000, XP
Error frame / Remote frame: Detection & generation
Board dimension approx.: 105 x 85 x 32 mm (4.1 x 3.3 x 1.3 in.)
Current consuption typ.:250 mA
Supply voltage: 7 to 33 V
Standard piggyback: CAN 1050 OPTO