Full Product Manual

PERIODIC SERVICE 11-12
① Bolt; ② Cover
③ “O” seal ring; ④ Engine oil filter
IMPORANT:
 To prevent serious damage to the engine, use
only a genuine filter.
■ Replacing Transmission Oil
CAUTION
To avoid personal injury:
 Be sure to stop the engine before changing
oil.
 Allow engine to cool down sufficiently, oil
can be hot and can burn.
1. Park the vehicle on a flat surface, raise the
cargo bed, and mount the safety support.
2. Replace with clean transmission oil;
3. Quickly tighten the filter until it contacts the
mounting surface, tighten it an additional 1
turn only.
4. After running the engine for a few minutes,
stop the engine and check the oil level again.
Add oil to the prescribed level.
Oil capacity
[Filter exchanged]
1L (1.05U.S. qts.)
① Oil Leve
② Oil inlet
③ Dipstick
④ Cap
■ Checking Brake Pedal
CAUTION
 Stop the engine and chock the wheels before
checking brake pedal.
 If movement is outside of the specifications
contact your local dealer for adjusting the
brake.
◆ Checking the brake pedal free travel
Proper brake pedal
free travel
7 to 14mm
(0.3 to in.)On the pedal
1. Release the parking brake.
2. Slightly depress the brake pedal and measure
free travel at the top of the pedal stroke.
3. If brake pedal free travel is outside of the
specifications, contact your local dealer for
adjusting the brake.