Full Product Manual

Operating the Vehicle
8-2
Bench seat
① Seat belt
2. Selecting light switch position.
■ Head Lights Switch
Turn on the key switch and toggle the head
light switch to the “ON” position.
Toggle the head light switch to the “OFF”
position to turn off the head light.
① Head light switch
② Head lights “OFF”
③ High beam lights "ON"
④ Low beam lights "ON"
⑤ 4WD button
⑥ 2WD button
⑦ Front axle differential lock
⑧ Front axle differential unlock
⑨ Emergency light "ON"
⑩ Emergency light "OFF"
⑪ Winch cable release
⑫ Winch cable pulled up
⑬ Left turning lights
⑭ Right turning lights
⑮ Plug cover
NOTE：
Turning the head light switch to the “ON”
position causes the following lamps to light
simultaneously.
1. Tail lights (lamps at the rear portions of the
vehicle)
2. Lamp built in the coolant temperature
gauge
3. Lamp built in the fuel gauge
4. Lamp built in the speedometer
5. Front left and right position lights
■ Emergency Light Switch
Press the top half of the emergency light
switch, the light flash along with the indicator
on the instrument panel. Press the bottom half
of the emergency light switch to turn off the
light.
Note:
The emergency light switch will operate
when the key switch is in the “ON”
position. Be careful that keeping the
switch “ON” causes the battery to run out.
■ Turn Signal Light Switch
[if equipped]
To indicate a right turn, push on the lower half
of the turn toggle switch.
To indicate a left turn, push on the upper half
of the turn toggle switch.
When the left or right signal is activated, the
indicated turning light will flash and the other
will stay on.
The indicator lamp at the instrument panel also
flashes indicating the direction of the turn.