Full Product Manual

Periodic Service
10-7
① Range gear shift lever pivot (spray type grease )
■ Checking engine start system
CAUTION
TO avoid personal injury
 Do not allow anyone near the vehicle
while testing.
 If the vehicle does not pass the test,
do not operate the vehicle.
◆ Preparation before testing
1. Place all control levers in the
“NEUTRAL” position.
2. Set the parking brake and stop the
engine.
◆ Test gear shift range lever safety
switch
1. Sit on the operator’s seat.
2. Shift the range gear shift lever to: “L”,
“H”, “N” or REVERSE position.
3. Turn the key to “START” position.
4. The engine must not crank.
5. If it cranks consult your local dealer for
this service.
① Range gear shift lever
■ Checking wheel bolt torque
CAUTION
To avoid personal injury
 Never operate vehicle with a loose wheel
bolts.
 Any time these bolts are loose they
should be retightened to the specified
torque.
 Check all bolts frequently and keep them
tight.
Check wheel bolts regularly especially when new
if they are loose tighten them as follows:
① Torque wheel bolts to 75to 90 N.m