Full Product Manual

Troubleshooting
11-4
MACHINE TROUBLESHOOTING
Trouble
Cause
Countermeasure
Gear Shift will not shift
into gear
 High idling speed of engine
 Replace throttle cable;
 Replace throttle petal
 Replace the throttle
 High rotary speed for clutch
connection.
 Replace he junior clutch spring;
 Replace the primary clutch.
 Poor adjustment for gearshift
cable.
 Put the gearshift rod into the
position of “N”.
 Put the gearshift arm of engine
into ”N”.
 Adjust the cable and the bolt.
 Lock tightly.
 Gear abrasion
 Replace the gears
Transmission noise
 Big matching clearance for the
inner and outside gears of
transmission shaft
 Replace the gears
 Big clearance of transmission
gears.
 Replace the gears
 Poor connection of gear end
face
 Replace the gears
Less vehicle power
 Parking brake
 Loosen the lay-up rod
 Disc brake is not releasing
properly
 Contact you dealer.
 CVT transmission sliding
 Removing the grease for the
clutch.
Replace CVT transmission belt
Replace the clutch.
No Brakes or Noise
 Less brake oil
 Check the braking oil level
 Air inside the braking system.
 Contact your dealer.
 Brake discs abrasion
 Contact your dealer.
 Assembling bolt of disc plate is
loose
 Lock tightly
 Assembling bolt for disc brake
clippers is loose
 Lock tightly
If you have any questions, consult your local dealer.