Version 01.
The variety of signal generation for production This document guides you step-by-step through the configuration procedure for the Vector Signal Generator R&S SMATE200A.
Option overview Base Unit SMATE200A SMATE-K SMATE-B Software Option Hardware Option 1400.7005.02 Vector Signal Generator RF path A SMATE-B103 SMATE-B106 1401.1000.02 1401.1200.02 100 kHz to 3 GHz 1st RF Path 100 kHz to 6 GHz 1st RF Path SMATE-B22 SMATE-B31 1401.2507.02 1401.1800.02 FM/PhiM Modulator and Low Phase Noise High Power Output 1st RF Path SMATE-B203 SMATE-B13 1401.2907.
Single-path instrument Applies if the instrument is equipped with one RF path and no more than one baseband path.
Choose digital modulation systems with R&S WinIQSIM™ 1 OPTIONAL Option SMATE-K11 SMATE-K12 SMATE-K13 SMATE-K14 SMATE-K15 SMATE-K17 SMATE-K19 SMATE-K20 Description Dig. Std. IS-95 Dig. Std. cdma2000 Dig. Std. 3GPP TDD Dig. Std. TD-SCDMA User-Defined OFDM Signals Dig. Std. 1xEV-DO Dig. Std. IEEE 802.11 (a/b/g) Dig. Std. 3GPP incl.
Two-path instrument Applies if the instrument is equipped with up to two RF paths and up to two baseband paths.
Step e Configure baseband path A OPTIONAL Choose baseband source Option SMATE-B13 Description Baseband Main Module SMATE-B10 Baseband Generator with ARB and Digital Modulation Baseband Generator with ARB (16 MSamples) and Digital Modulation SMATE-B11 MANDATORY Requires SMATEB10x Not compatible with - SMATE-B13 (in baseband path A) SMATE-B13 (in baseband path A) SMATE-B11 (in baseband path A) SMATE-B10 (in baseband path A) HW or SW Remarks HW Factory-installed.
Choose noise Option SMATE-K62 Step f OPTIONAL Description Additive White Gaussian Noise (AWGN) Requires SMATE-B13 Not compatible with - HW or SW Remarks SW Configure baseband path B OPTIONAL Choose baseband source Option SMATE-B13 Description Baseband Main Module SMATE-B10 Baseband Generator with ARB and Digital Modulation SMATE-B11 Baseband Generator with ARB (16 MSamples) and Digital Modulation MANDATORY Requires SMATE-B13 (in baseband path A) SMATE-B13 (in baseband path A or B) and SMATE-B1
Choose digital modulation systems with R&S WinIQSIM™ 1 Option SMATE-K11 SMATE-K12 SMATE-K13 SMATE-K14 SMATE-K15 SMATE-K17 SMATE-K19 SMATE-K20 Description Dig. Std. IS-95 Dig. Std. CDMA2000 Dig. Std. 3GPP TDD Dig. Std. TD-SCDMA User-Defined OFDM Signals Dig. Std. 1xEV-DO Dig. Std. IEEE 802.11 (a/b/g) Dig. Std. 3GPP incl.
Configuration Examples The modular design of the R&S SMATE200A allows the instrument to be equipped with up to two paths. This allows a multitude of applications to be performed for which several signal generators were previously required.
One baseband generator and two RF paths SMATE-B10 SMATE-B13 Two baseband generators and two RF paths SMATE-B10 SMATE-B13 SMATEB10x SMATE-B10 SMATE-B13 SMATEB20x SMATEB10x SMATEB20x Instrument configuration Option Installed SMATE200A 1x SMATEB10x 1x SMATEB20x 1x SMATE-B13 1x SMATE-B10 1x Description Base unit Frequency option 1st RF path Frequency option 2nd RF path Baseband main module Baseband generator Application example ¾ Generation of a modulated signal on path A and a CW interferer on pat
Ordering information Vector Signal Generator1 including power cable, Quick Start Guide and CD-ROM (with operating and service manual) R&S SMATE200A 1400.7005.02 Options RF path A 100 kHz to 3 GHz 100 kHz to 6 GHz Low Phase Noise and analog modulation FM / PhiM High-Power Output R&S SMATEB103 R&S SMATEB106 R&S SMATE-B22 R&S SMATE-B31 1401.1000.02 1401.1200.02 1401.2507.02 1401.1800.
Digital modulation systems using R&S WinIQSIM™ 2 Digital Standard IS-95 (with R&S WinIQSIM™) Digital Standard CDMA2000 (with R&S WinIQSIM™) Digital Standard 3GPP TDD (with R&S WinIQSIM™) Digital Standard TD-SCDMA (with R&S WinIQSIM™) User-Defined OFDM Signals (with R&S WinIQSIM™ and R&S WinIQOFDM) Digital Standard 1xEV-DO (with R&S WinIQSIM™) Digital Standard IEEE 802.11 (a/b/g) (with R&S WinIQSIM™) Digital Standard 3GPP FDD incl.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG · Trade names are trademarks of the owners R&S® SMATE200A ⋅ Version 01.00 ⋅ April 2005 ⋅ Data without tolerance limits is not binding ⋅ Subject to change www.rohde-schwarz.com Europe: Tel. +49 1805 12 4242, e-mail: customersupport@rohde-schwarz.com · North America: Tel. +1 410-910-7988, e-mail: customer.support@rsa.rohde-schwarz.com Asia: Tel. +65 68463710, e-mail: customer-service@rssg.rohde-schwarz.