Quickstart Guide

Overview
Mounting the Receiver
The receiver can easily be mounted against a wall or ceiling with the 2 mounting holes in the back of the
case. The mounting holes have a diameter of 6,3 mm and the center points are 62,9 mm apart from
each other. Loosen the 2 Phillips screws on the two sides of the case to open the enclosure.
(2) CH1 Button (3) CH2 Button
(4) Indicator LED
(1) LED Button
(5) Power LED
(6) TUYA LED
not used
(7) CH1 LED
(8) CH2 LED
(9) SETUP Button (10) CH1 RELAY (11) CH2 RELAY
(12) POWER INPUT TERMINAL
Mounting hole
Phillips screw
Phillips screw
Mounting hole