User Manual

P a g e | 7
10. The device is now added to your TUYA account. You will immediately see the interface with both
channels of the VM130V2SET. Press these buttons to make the corresponding channels on the
receiver switch. If the device is successfully paired with the TUYA IoT cloud, the TUYA LED (6) be
turned on permanently (see page 3). From now on, this TUYA LED (6) will display if there is an
active cloud connection.
11. Please disconnect the power to the receiver, wait 3 seconds and reconnect the power. The
device will boot in normal operation and you are ready to use it. It will automatically connect to
the cloud.
Connecting the receiver with the TUYA IoT cloud is optional. If not connected to the cloud, the
functionality of the VM130V2SET will be limited to ON/OFF functions for both channels with the
transmitter.